Windshield Side Reveal Molding Replacement

WINDSHIELD SIDE REVEAL MOLDING REPLACEMENT

REMOVAL PROCEDURE




1. Pull back the front door sealing weatherstrip (1) to expose the windshield reveal molding screws.




2. Remove the screws from the windshield reveal molding.
3. Remove the windshield reveal molding from the windshield pillar.

INSTALLATION PROCEDURE
1. Install the windshield reveal molding to the windshield pillar.




2. Install the screws to the windshield reveal molding.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the screws to the windshield reveal molding to 2 N.m (18 lb in).




3. Install the front door sealing weatherstrip (1) to the pinch-weld.
4. Close the door.