Strut Ball Stud Replacement - Liftgate

Strut Ball Stud Replacement - Liftgate

Removal Procedure

1. Open and support the liftgate.
2. Remove the strut. Refer to Strut Replacement - Liftgate (Strut Replacement - Liftgate) .




3. Remove the strut ball from the lid or body by turning counterclockwise.



Installation Procedure






Notice: Refer to Fastener Notice in Cautions and Notices.

1. Install the strut ball to lid or body by turning clockwise into the weldnut.

Tighten the strut ball to 25 N.m (18 lb ft).

2. Install the strut. Refer to Strut Replacement - Liftgate (Strut Replacement - Liftgate) .
3. Install the support. Close liftgate.