Seat Back Frame Replacement - Rear (With RPO Code YC5 and YC6)

SEAT BACK FRAME REPLACEMENT - REAR (WITH RPO CODE YC5 AND YC6)

REMOVAL PROCEDURE
1. Remove the bench seat from the vehicle.
2. Remove the seat back cover and pad.
3. Remove the headrest bushing.
4. Remove the rear seat latch release cable.




5. Remove the right and left seat back frame hinge bolts.




6. Remove the seat back frame.

INSTALLATION PROCEDURE




1. Install the seat back frame.




2. Install the right and left seat back frame hinge bolts.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the right and left seat back frame hinge bolts to 30 Nm (22 lb ft).

3. Install the rear seat latch release cable.
4. Install the headrest bushing.
5. Install the seat back cover and pad.
6. Install the bench seat to the vehicle.