Lock Actuator Replacement - Door

LOCK ACTUATOR REPLACEMENT - DOOR

TOOLS REQUIRED
M 39010 Heavy Duty Rivet Gun

REMOVAL PROCEDURE
1. Remove the trim panel.
2. Remove the water deflector away from the door.




3. Remove the rod that retains the actuator to the lever.
4. Remove the actuator wiring connector.
5. Remove the rivets that retain the actuator to the door.Drill out the head of the rivet with a 5 mm (3/16 in) drill bit.
6. Remove the actuator from the door.

INSTALLATION PROCEDURE




1. Install the actuator to the door.
2. Use the M 39010 in order to install the rivets that retain the actuator to the door.
3. Install the actuator wiring connector.
4. Install the actuator to the lever rod.
5. Install the water deflector.
6. Install the trim panel.