Latch Replacement - Lower

Latch Replacement - Lower

Removal Procedure

1. Remove the trim panel. Refer to Trim Panel Replacement - Rear Door (Cargo Doors) (Trim Panel Replacement - Rear Door (Cargo Doors))Trim Panel Replacement - Rear Door (E54) (Trim Panel Replacement - Rear Door (E54)) .
2. Separate the weatherstrip deflector at the perforation. Use a sharp-bladed tool if needed. Refer to Water Deflector Replacement (Service and Repair) .




3. Remove the control rod from the lock assembly.




4. Remove the bolts and the reinforcement.




5. Remove the following components from the door:

* The latch
* The rod
* The retainer

6. Remove the rod and the retainer from the latch.



Installation Procedure





1. Install the control rod and the retainer to the latch.
2. Install the retainer as shown in order to prevent squeaks and rattles.





Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the following components to the door. Ensure that the arrow on the retainer points toward the front of the vehicle:

* The latch
* The retainer
* The bolts

Tighten the bolts to the door to 8 N.m (71 lb in).







Important: Install new nylon retainers whenever you remove the control rods.


4. Install the control rod to the lock assembly.
5. Install the water deflector. Refer to Water Deflector Replacement (Service and Repair) .
6. Install the trim panel. Refer to Trim Panel Replacement - Rear Door (Cargo Doors) (Trim Panel Replacement - Rear Door (Cargo Doors))Trim Panel Replacement - Rear Door (E54) (Trim Panel Replacement - Rear Door (E54)) .