Lock Lever Replacement - Rear Door Remote

Lock Lever Replacement - Rear Door Remote

Removal Procedure

Tools Required

M 39010 Heavy Duty Rivet Gun

1. Remove the trim panel. Refer to Trim Panel Replacement - Rear Door (Cargo Doors) (Trim Panel Replacement - Rear Door (Cargo Doors))Trim Panel Replacement - Rear Door (E54) (Trim Panel Replacement - Rear Door (E54)) .
2. Use a sharp-bladed tool, if needed, in order to separate the water deflector at the perforations. Refer to Water Deflector Replacement (Service and Repair) .




3. Remove the control rods from the lever (3).
4. Grind the head of the rivet (1) in order to remove the lever to door rivet.
5. Remove the lever from the door.



Installation Procedure





1. Install the lever to the door.
2. Use M 39010 in order to install the lever to door rivets (1).
3. Install the control rods to the lever (3) .
4. Install the water deflector. Refer to Water Deflector Replacement (Service and Repair) .
5. Install the trim panel. Refer to Trim Panel Replacement - Rear Door (Cargo Doors) (Trim Panel Replacement - Rear Door (Cargo Doors))Trim Panel Replacement - Rear Door (E54) (Trim Panel Replacement - Rear Door (E54)) .