Cruise Control Module: Service and Repair

CRUISE CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE




1. Remove cruise control cable from throttle body lever.




2. Remove the cruise control cable bead (2) from the end of the ribbon (1).

IMPORTANT: Do not allow the cruise control ribbon to retract into the module assembly

3. Disconnect the electrical connector from cruise module.




4. Remove the cruise control module bolts.
5. Remove the cruise control module.

INSTALLATION PROCEDURE




1. Install the cruise control module.
2. Install the cruise control module bolts.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the cruise control module bolts to 12 N.m (106 lb in).

3. Connect the electrical connector to cruise module.




4. Install cruise control cable bead (2) to ribbon (1).




5. Install cruise control cable to throttle body lever.
6. Perform the functional check.