Horn Switch: Service and Repair

Horn Switch Replacement

Removal Procedure

Caution: Refer to SIR Caution in Service Precautions.

1. Disable the Restraints system.
2. Remove the steering wheel inflator module.





3. Remove the horn plunger contact from the steering wheel.
4. Remove the horn switch to steering wheel mounting screws.
5. Remove the horn switch.

Installation Procedure





1. Install the horn switch to the steering wheel.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the horn switch to the steering wheel with mounting screws.
^ Tighten the screws to 5.5 Nm (49 inch lbs.).
3. Install the horn plunger contact to the cam tower in the steering wheel.
4. Install the steering wheel inflator module to the steering wheel.
5. Enable the Restraints system.