Radio Replacement (With RPO Code UM6, UM7)

RADIO REPLACEMENT

REMOVAL PROCEDURE
1. Disconnect the Battery negative Cable.

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

2. Remove the instrument panel accessory trim plate.




3. Remove the radio mounting screws.
4. Remove the radio.
5. Disconnect the electrical connector and the antenna lead.

INSTALLATION PROCEDURE




1. Connect the electrical connector and the antenna lead.
2. Install the radio.
3. Install the radio mounting screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 1.9 N.m (17 lb in).

4. Install the instrument panel accessory trim plate.
5. Connect the battery negative cable.
6. Verify proper radio operation.