Rear Bumper: Service and Repair

Bumper Extension Replacement - Rear

Removal Procedure





1. Remove three screws securing the rear bumper extension to the wheelhouse panel.
2. Remove the bolt that retains the rear bumper extension to the brace.
3. Remove the nuts that retain the rear bumper extension to the rear quarter panel.


Installation Procedure






Notice: Refer to Fastener Notice in Service Precautions.

1. Install the nuts that retain the rear bumper extension to the rear quarter panel.

Tighten the rear bumper extension to the rear quarter panel nuts to 10 N.m (7 lb ft).

2. Install the screws securing the rear bumper extension to the wheelhouse panel.
The screws should be installed from the top to the bottom.

Tighten the rear bumper extension to the wheelhouse screws to 1.9 N.m (17 lb in).

3. Install the bolt that retains the brace to the rear bumper extension.

Tighten the brace to the rear bumper extension bolt to 10 N.m (7 lb ft).