Handle Replacement - Rear Door Inside

Handle Replacement - Rear Door Inside

Tools Required

J 34940 Rivet Gun


Removal Procedure





1. Open the endgate.
2. Remove the screws that retain the inside handle to the endgate handle assembly.
3. Drill out the rivets that retain the endgate handle assembly to the endgate.
4. Remove the endgate handle assembly from the endgate.


Installation Procedure





1. Position the endgate handle assembly on the endgate.
2. Install the endgate handle assembly to the endgate with 2 rivets using a J 34940 .

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the screws that retain the inside handle to the endgate handle assembly.

Tighten the screws to 2.8 N.m (25 lb in).