Latch Replacement - Endgate Window

Latch Replacement - Endgate Window

Removal Procedure





1. Remove the endgate cover.
2. Mark the location of the endgate window latch in order to ensure proper alignment at installation.
3. Disconnect the electrical connectors, as needed.
4. Remove the nuts that retain the endgate window latch to the endgate window latch support.
5. Remove the endgate window latch from the endgate.


Installation Procedure





1. Install the endgate window latch.
Ensure that the latch is properly aligned with the marks made during disassembly.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the nuts that retain the endgate window latch to the endgate window latch support.

Tighten the nuts to 10 N.m (88 lb in).

3. Connect the electrical connectors, as needed.
4. Install the endgate cover.