Mat/Carpet Replacement - Front Floor (Utility)

Mat/Carpet Replacement - Front Floor (Utility)

Removal Procedure

1. Remove the front seats.
2. Remove the rear seats.
3. Remove the rear seat belt buckles from the floor.
4. Remove the door sill trim plates.
5. For 4-door models, remove the front side door lock pillar garnish moldings. Refer to Garnish Molding Replacement - Side Door Lock Pillar (CF5).
6. For 4-door models, remove the C-pillar lower trim panels. Refer to Trim Replacement - Third Pillar (4-Door Utility).
7. Remove the body side trim panels as necessary.
8. Remove the floor console or cup holder, if equipped.
9. Remove the body hinge pillar trim panels.




10. Remove the carpet or mat from the vehicle.


Installation Procedure







Caution: In order to avoid personal injury or vehicle damage when you repair or replace the carpet, use the same thickness and material size as the original installation. Always return the carpet to the original location.


1. Install the carpet or the mat to the vehicle.
2. Install the body hinge trim panels.
3. Install the floor console or cup holder, if equipped.
4. Install the body side trim panels as necessary.
5. For 4-door models, install the C-pillar lower trim panels. Refer to Trim Replacement - Body Side (2-Door Utility).
6. For 4-door models, install the front side door lock pillar garnish moldings. Refer to Trim Replacement - Body Side (4-Door Utility).
7. Install the door sill trim plates.
8. Install the rear seat belt buckles to the floor.
9. Install the rear seats.
10. Install the front seats.