Procedures

SEAT CUSHION TRIM COVER AND PAD REPLACEMENT (BENCH)

REMOVAL PROCEDURE
1. Remove the seat from the vehicle.
2. Remove the seat back release lever, if equipped.
3. Remove the seat back.




4. Separate the J-strips from the seat bottom frame.
5. Remove the manual lumbar knob lever, if equipped.
6. Remove the seat bottom cover.
7. Remove the seat bottom pad.

INSTALLATION PROCEDURE
1. Install the seat bottom pad to the seat bottom.
2. Install the seat bottom cover over the pad.




3. Engage the J-strips to the seat bottom frame.
4. Install the seat back.
5. Install the seat back release lever, if equipped.
6. Install the manual lumbar knob lever, if equipped.
7. Install the seat to the vehicle.