Instrument Panel (IP) - Accessory Trim Plate Replacement

Trim Plate Replacement - Instrument Panel (I/P) Accessory

Removal Procedure





1. Remove the left instrument panel (I/P) sound insulator.
2. Remove the knee bolster trim panel.
3. Remove the screws that retain the accessory trim plate to the I/P.
4. Remove the I/P accessory trim plate by releasing the retaining clips.
5. Position the I/P accessory trim plate in order to remove the control switches.

* Remove the selectable 4WD switch, if equipped.
* Remove the headlamp switch.

Installation Procedure





1. Position the I/P accessory trim plate in order to install the control switches.

* Install the selectable 4WD switch, if equipped.
* Install the headlamp switch.

2. Install the instrument panel accessory trim plate clips to the instrument panel.

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the screws that retain the accessory trim plate to the I/P.

Tighten the screws to 1.9 N.m (17 lb in).

4. Install the knee bolster trim panel.
5. Install the left I/P sound insulator.