Horn Replacement - Left

HORN REPLACEMENT - LEFT

REMOVAL PROCEDURE




1. Remove the windshield washer solvent container.
2. Disconnect the electrical connector from the horn.




3. Remove the bolt that retains the horn to the inner fender.
4. Remove the horn from the inner fender.

INSTALLATION PROCEDURE




1. Install the horn to the inner fender.
2. Install the bolt that retains the horn to the inner fender.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bolt to 17 N.m (13 lb ft).




3. Connect the electrical connector to the horn.
4. Install the windshield washer solvent container.