Power Steering Cooler Pipe/Hose Replacement

Power Steering Cooler Pipe/Hose Replacement

Removal Procedure

Notice: Refer to Power Steering Hose Disconnected.





1. Remove the air cleaner assembly.
2. Install a drain pan under the vehicle.
3. Disconnect the power steering cooler hose from the power steering pump.





4. Disconnect the power steering cooler hose from the power steering cooler.
5. Remove the power steering cooler hose from the vehicle.

Installation Procedure

Notice: Refer to Installing Hoses Without Twists or Bends.





1. Install the power steering cooler hose to the vehicle.

Notice: Refer to Fastener Notice in Service Precautions.

2. Connect the power steering cooler hose to the power steering cooler.
^ Tighten the power steering hose clamp to 2 Nm (18 inch lbs.).





3. Connect the power steering cooler hose to the power steering pump.
^ Tighten the power steering hose clamp to 2 Nm (18 inch lbs.).
4. Remove the drain pan from under the vehicle.
5. Install the air cleaner assembly.
6. Bleed the power steering system.