Steering Linkage Shield Replacement

Steering Linkage Shield Replacement

Removal Procedure





1. Raise and suitably support the vehicle with safety stands. Refer to Vehicle Lifting.
2. Remove the steering linkage shield bolts and the washers.
3. Remove the steering linkage shield.

Installation Procedure





1. Install the steering linkage shield.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the steering linkage shield bolts and the washers.
^ Tighten the steering linkage shield bolts to 32 Nm (24 ft. lbs.).
3. Lower the vehicle.