Rear Door Window Regulator: Service and Repair

Window Regulator Replacement - Rear Door

Tools Required

J 34940 Rivet Gun


Removal Procedure

Important: The rear door power window motor and regulator replacement parts are sold as an assembly. Do not attempt to separate the motor from the regulator before verifying that separate replacement parts are available.


1. Remove the window.
2. Disconnect the power window motor electrical connector, if equipped.
3. Remove the electrical harness retainers, if equipped.




4. Drill out the rivets that secure the window regulator to the door.
5. Remove the window regulator and the motor assembly (power windows only) from the door.


Installation Procedure





1. Install the window regulator and the motor assembly (power windows only) to the door.
2. Install the rivets that secure the window regulator to the door using J 34940.
3. Install the electrical harness retainers, if equipped.
4. Install the power window motor electrical connector, if equipped.
5. Install the window.