Keyless Entry Receiver: Service and Repair

REMOTE CONTROL DOOR LOCK RECEIVER REPLACEMENT

REMOVAL PROCEDURE




1. Remove the left side instrument panel sound insulator.
2. Disconnect the electrical connector.
3. Remove the remote control door lock receiver from the instrument panel sound insulator by unsnapping it.

INSTALLATION PROCEDURE




1. Install the remote control door lock receiver from the instrument panel sound insulator by snapping it.
2. Connect the electrical connector.
3. Install the left side instrument panel sound insulator.
4. Reprogram the transmitters. Refer to Transmitter Programming. Programming and Relearning
5. Test the operation of the system.