Handle Replacement - Endgate (Utility)

Handle Replacement - Endgate (Utility)

Removal Procedure





1. Remove the handle grip screws.
2. Remove the liftgate trim panel.
3. Release the liftgate handle rod retainer.




4. Remove the bolts that retain the liftgate outside handle to the liftgate.




5. Remove the liftgate outside handle from the liftgate.


Installation Procedure





1. Install the liftgate outside handle to the liftgate.





Notice: Refer to Fastener Notice in Service Precautions.

2. Install the bolts that retain the liftgate outside handle to the liftgate.

Tighten the bolts to 4 N.m (35 lb in).





3. Install the liftgate handle rod to the liftgate handle.
4. Engage the retainer.
5. Install the liftgate trim panel.