Seat Replacement - Rear (4-Door Utility)

SEAT REPLACEMENT - REAR (4-DOOR UTILITY)

REMOVAL PROCEDURE




1. Remove the seat leg trim covers.

IMPORTANT: Remove the passenger side rear seat before removing the driver side rear seat.




2. Tilt the seat back slightly forward in order to remove the seat leg nuts.
3. Fold the seat in order to remove the rear seat nuts.
4. Remove the seat from the vehicle.

INSTALLATION PROCEDURE




1. Install the seat to the vehicle.
2. Fold the seat back forward in order to install the rear seat mounting nuts.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the rear seat mounting nuts to 80 N.m (59 lb ft).




3. Install the seat leg trim covers.Ensure that the covers lock into place.