Brake Rotor/Disc
| Front | JM3 | Front Disc Brakes | 10.5 X 1.03 in. |
| Rotor Discard Thickness | 0.965 inch All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum or discard thickness specifications. | ||
| Rotor Minimum Allowable Thickness After Refinish | 0.980 inch | ||
| Rotor Thickness (new) | 1.03 inch | ||
| Rotor Maximum Allowable Lateral Runout | 0.002 inch | ||
| Rotor Maximum Allowable Scoring | 0.059 inch | ||
| Rotor Maximum Allowable Thickness Variation | 0.001 inch | ||
| JC1 | Front Disc Brakes | 10.8 X 1.14 in. | |
| Rotor Discard Thickness | 1.08 in All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum or discard thickness specifications. | ||
| Rotor Minimum Allowable Thickness After Refinish | 1.13 inch | ||
| Rotor Thickness (new) | 1.14 inch | ||
| Rotor Maximum Allowable Lateral Runout | 0.002 inch | ||
| Rotor Maximum Allowable Scoring | 0.059 inch | ||
| Rotor Maximum Allowable Thickness Variation) | 0.001 inch | ||
| Rear | JC1 | Rear Disc Brakes | 11.6 X .79 in. |
| Rotor Discard Thickness | 0.728 inch All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum or discard thickness specifications. | ||
| Rotor Minimum Allowable Thickness After Refinish | 0.735 inch | ||
| Rotor Thickness (new) | 0.787 inch | ||
| Rotor Maximum Allowable Lateral Runout | 0.002 inch | ||
| Rotor Maximum Allowable Scoring | 0.059 inch | ||
| Rotor Maximum Allowable Thickness Variation | 0.001 inch | ||
| Front | Rotor Discard Thickness | 1.08 inch All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum or discard thickness specifications. | |
| Rotor Minimum Allowable Thickness After Refinish | 1.13 inch | ||
| Rotor Thickness (new) | 1.14 inch | ||
| Rotor Maximum Allowable Lateral Runout | 0.002 inch | ||
| Rotor Maximum Allowable Scoring | 0.059 inch | ||
| Rotor Maximum Allowable Thickness Variation | 0.001 inch | ||
| Rear | Rotor Discard Thickness | 0.728 inch All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum or discard thickness specifications. | |
| Rotor Minimum Allowable Thickness After Refinish | 0.735 inch | ||
| Rotor Thickness (new) | 0.787 inch | ||
| Rotor Maximum Allowable Lateral Runout | 0.002 inch | ||
| Rotor Maximum Allowable Scoring | 0.059 inch | ||
| Rotor Maximum Allowable Thickness Variation | 0.001 inch | ||
| Rear Brake Backing Plate Mounting Nuts | 100 ft. lbs. |