Actuator Replacement - Front Drive Axle

Actuator Replacement - Front Drive Axle

Removal Procedure
1. Remove the battery and battery tray.





2. Disconnect the vacuum hose from the vacuum actuator.





3. Disconnect front drive axle clutch cable.





4. Remove the vacuum actuator bolts.
5. Remove the vacuum actuator.

Installation Procedure





1. Install the vacuum actuator.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the vacuum actuator bolts.
Tighten the bolts to 1.4 Nm (12 inch lbs.).





3. Connect the front drive axle clutch cable.
The front drive axle clutch cable must engage the vacuum actuator retainer spring.





4. Connect the vacuum hose.
5. Install the battery tray and the battery.