Washers Inoperative - Headlamp

WASHERS INOPERATIVE - HEADLAMP

TEST DESCRIPTION

Steps 1 - 12:

Steps 13 - 18:

The numbers below refer to the step numbers on the diagnostic table.
3. Tests the operation of the headlamp washer pump relay and circuits. If the test lamp illuminates for a few seconds the washer pump is faulty.
4. Tests the battery positive voltage supply circuit to the headlamp washer pump relay.
5. Tests the washer pump control circuit to the headlamp washer pump relay.
6. Tests the front park lamp voltage supply circuit to the headlamp washer pump relay.