Module Replacement - Ventilation Heat and Cool - Seat Cushion

MODULE REPLACEMENT - VENTILATION HEAT AND COOL - SEAT CUSHION

REMOVAL PROCEDURE
1. Remove the console cup holder assembly.




2. Remove the wire connector (2) from the bracket.
3. Slide the module forward in car.
4. Disconnect the wire connectors (1).
5. Remove the module from the bracket.

INSTALLATION PROCEDURE




1. Connect the wire connectors (1) to the module.
2. Slide the module rearwards till it clicks in place.
3. Install the wire connector (2) to the bracket.
4. Install the console cup holder assembly.