60. Engine Block Plug Installation

Engine Block Plug Installation





1. Add sealer GM P/N United States 12346004, GM P/N Canada 10953480 to the plug threads.

2. Install the engine block oil gallery plug to rear of block.
Tighten the engine block oil gallery plug to 80 Nm (40 ft. lbs.).

Notice: Refer to Fastener Notice in Service Precautions.






3. Add sealer GM P/N United States 12346004, GM P/N Canada 10953480 to the plug threads.
4. Install the engine block oil gallery plugs to front and left of block.
^ Tighten the side engine block oil gallery plugs to 35 Nm (26 ft. lbs.).
^ Tighten the front (1) engine block oil gallery plug to 80 Nm (40 ft. lbs.).





5. Add sealer GM P/N United States 12346004, GM P/N Canada 10953480 to the coolant temperature sensor threads.
6. Install the coolant temperature sensor.
Tighten the coolant temperature sensor to 20 Nm (15 ft. lbs.).





7. Add sealer GM P/N United States 12346004, GM P/N Canada 10953480 to the EVAP solenoid bolt threads.
Tighten the EVAP solenoid bolt to 10 Nm (89 inch lbs.).





8. Install the knock sensors.
Tighten the knock sensors to 25 Nm (18 ft. lbs.).





9. Add sealer GM P/N United States 12346004, GM P/N Canada 10953480 to the crankshaft position sensor bolt.
10. Install the crankshaft position sensor and bolt.
Tighten the crankshaft position sensor bolt to 10 Nm (89 inch lbs.).