Accessory Power Receptacle Replacement - 12 Volt - Rear Quarter Trim

ACCESSORY POWER RECEPTACLE REPLACEMENT - 12 VOLT - REAR QUARTER TRIM

REMOVAL PROCEDURE
1. Partially remove the body side trim panel. Refer to cell Trim Panel Replacement - Body Side (Envoy XUV) in Interior Trim.




2. Disconnect the electrical connector from the 12-volt outlet assembly.




3. Remove the threaded ring and lock washer from the outlet.
4. Remove the outlet assembly from the vehicle.

INSTALLATION PROCEDURE
1. Install the outlet assembly properly indexed to the body side trim panel.




2. Install the lock washer and threaded ring.




3. Connect the electrical connector.
4. Install the body side trim panel.