Transfer Case Speed Sensor Replacement - Left Rear

Transfer Case Speed Sensor Replacement - Left Rear
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.





2. Disconnect the transfer case left rear speed sensor electrical connector.
3. Remove the transfer case left rear speed sensor.

Installation Procedure





1. Notice: Refer to Fastener in Service Precautions.

Install the transfer case left rear speed sensor into the transfer case.
Tighten the speed sensor to 17 Nm (13 ft. lbs.).
2. Connect the transfer case left rear speed sensor electrical connector.
3. Lower the vehicle.