Door Check Link Replacement - Sliding
Door Check Link Replacement - Sliding
Removal Procedure
1. Open the sliding door half way.
2. Remove the bolt for the sliding door catch with the reinforcement channel from the sliding door lower track.
3. Remove the sliding door catch with the reinforcement channel from the sliding door lower track.
Installation Procedure
1. Install the sliding door catch with reinforcement channel to the sliding door lower track.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the sliding door catch with reinforcement channel bolt to the sliding door lower track.
Tighten the reinforcement channel bolt to 12 N.m (106 lb in).
3. Completely open the sliding door in order to ensure that the sliding door catch holds the sliding door in the open position.
4. Close the sliding door.