Locating Pin Replacement - Sliding Door

Locating Pin Replacement - Sliding Door

Removal Procedure





1. Remove the sliding door locating pin screws.
2. Remove the sliding door locating pin from the vehicle.



Installation Procedure





1. Install the sliding door locating pin to the sliding door.
2. Loosely install the sliding door locating pin screws, just tightly enough to retain the locating pin.
3. Close and then reopen the sliding door.

Notice: Refer to Fastener Notice in Cautions and Notices.

4. Re-torque the locating pin screws to the sliding door.

Tighten the sliding door locating pin screws to 10 N.m (89 lb in).