Accelerator Pedal: Service and Repair

ACCELERATOR CONTROLS PEDAL REPLACEMENT

REMOVAL PROCEDURE




1. Remove the left instrument panel sound insulator.
2. Disconnect the accelerator cable from accelerator pedal.
3. Remove the fasteners holding the accelerator pedal to the bulk head.
4. Remove the accelerator pedal.

INSTALLATION PROCEDURE




1. Position the accelerator pedal to the bulkhead.
2. Install the accelerator pedal bolt and stud.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bolts to 5 N.m (44 lb in).

3. Connect the accelerator cable to accelerator pedal.
4. Check for complete throttle opening and closing positions by operating the accelerator pedal. Also inspect the carpet fit under the accelerator pedal.
5. Install the left instrument panel sound insulator.