Trunk / Liftgate Handle: Service and Repair

Handle Replacement - Liftgate

Removal Procedure





1. Open the liftgate.
2. Remove the liftgate trim panel. Refer to Trim Panel Replacement - Liftgate (Service and Repair) .




3. Disconnect the outside handle swing over clip from the outside handle rod.
4. Remove the liftgate outside handle nuts.
5. Remove the liftgate handle from the liftgate.



Installation Procedure





1. Position the liftgate handle to the liftgate.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the nuts to the liftgate handle.

Tighten the liftgate handle nuts to 4 N.m (35 lb in).





3. Reconnect the outside handle swing over clip to the outside handle rod.
4. Install the liftgate trim panel. Refer to Trim Panel Replacement - Liftgate (Service and Repair) .
5. Close the liftgate.