Trunk / Liftgate Stop: Service and Repair

Bumper Replacement - Liftgate

Removal Procedure

1. Open the liftgate.




2. Remove the tail lamp. Refer to Tail Lamp Assembly and /or Backup, Sidemarker, Stop, Turn Signal Bulb Replacement (Equinox) Tail Lamp Assembly and /or Backup, Sidemarker, Stop, Turn Signal Bulb Replacement (Torrent) in Lighting Systems.
3. Remove the liftgate bumper bolts.
4. Remove the bumper.



Installation Procedure





1. Position the liftgate bumper on the liftgate.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the bumper bolts.

Tighten the bumper bolts to 8 N.m (71 lb in).

3. Install the tail lamp. Refer to Tail Lamp Assembly and /or Backup, Sidemarker, Stop, Turn Signal Bulb Replacement (Equinox) Tail Lamp Assembly and /or Backup, Sidemarker, Stop, Turn Signal Bulb Replacement (Torrent) in Lighting Systems.
4. Close the liftgate.
5. Inspect for proper engagement of the liftgate bumper.