Dimmer Switch: Service and Repair

INSTRUMENT PANEL (I/P) DIMMER SWITCH REPLACEMENT

REMOVAL PROCEDURE
1. Remove the left side air deflector from the instrument panel (I/P).




2. Disconnect the electrical connector from the dimmer switch.
3. Remove the screw from the I/P dimmer switch.
4. Remove the switch.

INSTALLATION PROCEDURE




1. Install the dimmer switch to the left side air deflector panel.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screw to 2.5 N.m (22 lb in).
2. Install the electrical connector to the dimmer switch.
3. Install the left side air deflector panel to the I/P.
4. Test the dimmer switch for proper operation.