Ambient Light Sensor: Service and Repair

AMBIENT LIGHT SENSOR REPLACEMENT

REMOVAL PROCEDURE




1. Remove the access panel covers from the upper trim pad.
2. Remove the I/P cluster trim panel.
3. Remove the windshield garnish moldings.




4. Remove the upper trim pad bolts.
5. Lift the upper trim pad to disengage the clips.




6. Twist the ambient light sensor to remove the sensor from the upper trim pad.
7. Disconnect the electrical connector from the ambient light sensor.

INSTALLATION PROCEDURE




1. Connect the electrical connector to the ambient light sensor.
2. Align the sensor to the upper trim pad and twist into place.




3. Align the upper trim pad to the I/P and fasten the bolts in place.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bolts to 10 N.m (89 lb in).
4. Install the windshield garnish moldings.
5. Install the I/P cluster trim panel.




6. Install the access panel covers to the upper trim pad.
7. Test the ambient light sensor for proper operation.