35. Cylinder Head Disassemble

Cylinder Head Disassemble

^ Tools Required
- J 8062 Valve Spring Compressor
- J 36017 Valve Guide Seal Remover
- J 43963 Valve Spring Compressor (off car)





1. Remove the coolant air bleed hose fitting.





2. Important: Ensure that the valve train components are kept together and identified in order for proper re-installation in their original position.

Using the J 8062 and the J 43963, compress the valve spring.
3. Remove the valve keys.
4. Slowly release the J 8062 and the J 43963 from the valve spring assembly.
5. Remove the retainer.





6. Remove the spring.





7. Notice: Do not damage the valve guide. Remove any burrs that have formed at the key groove by chamfering the valve stem with an oil stone or a file.

Remove the valve seal. Use the J 36017. Do not reuse.





8. Remove the valve.
9. Remove the remaining valves.





10. Remove the cylinder head plugs.