Body - Revised Liftgate Inside Handle Replacement
Bulletin No.: 06-08-66-004Date: February 22, 2006
SERVICE MANUAL UPDATE
Subject:
SMU - Revised Lift Gate Inside Pull Handle Replacement and Liftgate Trim Panel Replacement
Models:
2006 Chevrolet HHR
This bulletin is being issued to revise the Lift Gate Inside Pull Handle Replacement procedure and the Liftgate Trim Panel Replacement procedure in the Body Rear End sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.
The information shown has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.
Disclaimer