Engine Support Fixture

Engine Support Fixture

^ Tools Required
- J 28467-B Universal Engine Support Fixture
- J 28467-500 Engine Support Fixture Adaptors

Installation Procedure





1. Install the J 28467-500 (1) to the support fixture long bar (2) in J 28467-B. Place the engine support fixture long bar (2) across the engine compartment and place the J 28467-500 on top of the left and right fender lips.





2. From the J 28467-B, install the J 28467-4A to the J 28467-2A and install the J 28467-9 through the top hole.
3. Place the J 28467-4A foot on the radiator support.





4. Install the J 28467-1A bracket where the long bar and the J 28467-4A intersect.
5. Hand tighten the J 28467-1A bracket wing nuts.





6. Install the J 28467-34 lift hook wing nut and washer to the J 28467-7A lift hook.
7. Repeat the previous step in order to assemble two lift hooks and brackets.





8. Place the engine support cross bar over the engine support long bar (2) and connect the hooks (1) to the engine lift brackets. Ensure the hook does not damage adjacent components.