Air Flow Meter/Sensor: Service and Repair

MASS AIR FLOW (MAF)/INTAKE AIR TEMPERATURE (IAT) SENSOR REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the mass airflow (MAF) sensor electrical connector.
2. Remove the air cleaner assembly.




3. Remove the MAF sensor screws.
4. Remove the MAF sensor.

INSTALLATION PROCEDURE




1. Install the MAF sensor.
2. Install the MAF sensor screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 10 N.m (89 lb in).




3. Install the air cleaner assembly.
4. Connect the MAF sensor electrical connector.