Clutch Pedal Position Sensor / Switch: Adjustments

Clutch Pedal Position Switch Adjustment

Adjustment Procedure





1. A 3/32 inch or 2 mm drill bit can be used as a gage tool for the proper adjustment of the CPP switch. Insert and seat the 3/32 inch or 2 mm drill bit through the slot in the top of the clutch pedal assembly.
2. Rotate the CPP switch (1) counterclockwise to release from the clutch pedal assembly.
3. While holding the pedal in the fully released position, press the switch (1) toward the pedal until the barrel of the switch touches the drill bit on the pedal assembly.
4. Rotate the switch (1) clockwise to secure.
5. Remove the drill bit.