Microphone Replacement - Radio Volume Compensator Interior
MICROPHONE REPLACEMENT - RADIO VOLUME COMPENSATOR INTERIOR
REMOVAL PROCEDURE
1. Remove the left knee bolster.
2. Remove the right knee bolster.
3. Disconnect the electrical connector.
4. Remove the screws securing the microphone to the knee bolster.
5. Remove the microphone.
INSTALLATION PROCEDURE
1. Locate the microphone to the knee bolster.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the screws securing the microphone to the knee bolster.
Tighten the screws to 2 N.m (18 lb in).
3. Connect the electrical connector.
4. Install the right knee bolster.
5. Install the left knee bolster.