Ashtray Replacement

Ashtray Replacement

Removal Procedure





1. Remove the 2 fasteners retaining the ash tray door assembly to the instrument panel (I/P).
2. Partially remove the door assembly away from the I/P.
3. Disconnect the electrical connector to the door assembly.
4. Remove the door assembly from the vehicle.



Installation Procedure





1. Position the door assembly to the I/P.
2. Connect the electrical connector to the door assembly.

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the 2 retaining fasteners ensuring the door is properly aligned to the latch.

Tighten the fasteners to 2.5 N.m (22 lb in).