Lock Cylinder Replace - Console Compartment Door

LOCK CYLINDER REPLACE - CONSOLE COMPARTMENT DOOR

REMOVAL PROCEDURE
1. Remove the console upper trim plate.




2. With the key, move the lock cylinder to the LOCKED position (1).
3. Remove the key from the lock cylinder.




4. Remove the screw (1) retaining the lock cylinder assembly to the upper console.
5. Remove the lock cylinder assembly from the upper console.

INSTALLATION PROCEDURE




1. Move the lock cylinder to the UNLOCK position (1).
2. Position the lock cylinder assembly to the upper console.




3. Install the screw (1) retaining the lock cylinder assembly to the upper console.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 2.5 N.m (22 lb in).




4. With the key, move the lock cylinder to the LOCKED position (1).
5. Install the console upper trim plate.