Console Compartment Door Hinge Replacement

Console Compartment Door Hinge Replacement

Removal Procedure

1. Remove the rear upper garnish molding. Refer to Garnish Molding Replacement - Rear Upper (Removal and Replacement) .
2. Remove the console upper trim plate. Refer to Trim Plate Replacement - Console Upper (Removal and Replacement) .




3. Remove the 3 screws retaining the upper hinge to the console upper trim plate.
4. Remove the hinge from the console upper trim plate.



Installation Procedure

1. Position the hinge to the console upper trim plate.





Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the 3 screws retaining the upper hinge to the console upper trim plate.

Tighten the screws to 2.5 N.m (22 lb in).

3. Install the console upper trim plate. Refer to Trim Plate Replacement - Console Upper (Removal and Replacement) .
4. Install the rear upper garnish molding. Refer to Garnish Molding Replacement - Rear Upper (Removal and Replacement) .