Seat Back Cushion-Side Bolster Panel Replacement

SEAT BACK CUSHION-SIDE BOLSTER PANEL REPLACEMENT

REMOVAL PROCEDURE
1. Remove the seat from the vehicle.
2. Remove the seat back cover.
3. Remove the inflatable restraint side impact module.




4. Remove the 2 screws that retain the seat back cushion side bolster panel to the seat back frame.

INSTALLATION PROCEDURE




1. Install the 2 screws that secure the seat back cushion side bolster panel to the seat back frame.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the seat back cushion side bolster panel screws to 6.25 N.m (55 lb in).

2. Install the inflatable restraint side impact module.
3. Install the seat back cover.
4. Install the seat in the vehicle.