Knee Bolster Replacement - Left

Knee Bolster Replacement - Left

Removal Procedure

1. Remove the left instrument panel (I/P) trim panel. Refer to Instrument Panel (I/P) Trim Panel Replacement - Left (Removal and Replacement) .




2. Remove 3 screws (1) retaining the knee bolster to the instrument panel.




3. Disconnect the electrical connector (2) from the headlamp switch.



Installation Procedure





1. Connect the electrical (2) connector to the headlamp switch.





Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the 3 screws (1) retaining the knee bolster to the I/P.

Tighten the screws to 2.5 N.m (22 lb in).

3. Install the left I/P trim panel. Refer to Instrument Panel (I/P) Trim Panel Replacement - Left (Removal and Replacement) .