Daytime Running Lamp Diode Assembly: Service and Repair

DAYTIME RUNNING LAMPS (DRL) DIODE REPLACEMENT

REMOVAL PROCEDURE




1. Cycle the folding top to the open position.




2. Loosen the retaining nuts to the body accessories compartment.
3. Remove the cover to the body accessories compartment.




4. Remove the electrical connector from the daytime running lamp (DRL) diode (2).
5. Remove the fastener (1).
6. Remove the DRL diode from the body accessories compartment.

INSTALLATION PROCEDURE




1. Install the fastener (1).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the fastener to 2.5 N.m (22 lb in).

2. Install the electrical connector to the DRL diode (2).




3. Install the cover to the body accessories compartment.
4. Install the retaining nuts to the body accessories compartment.

Tighten the nuts to 7 N.m (62 lb in).

5. Close the folding top.