Horn Switch Replacement

Horn Switch Replacement

Removal Procedure

1. Caution: Refer to Servicing the SIR System Caution in Service Precautions.

Disable the SIR system. Refer to Restraint System Disabling and Enabling Zone 3.
2. Remove the Inflatable Restraint Steering Wheel module.





3. Remove the horn plunger from the steering column by pressing inward to the stop and by rotating the plunger 90 degrees.





4. Disconnect the screws (1,4) from the steering wheel (3).
5. Remove the horn switch (2) from the steering wheel (3).

Installation Procedure





1. Install the horn switch (2) to the steering wheel (3).

2. Notice: Refer to Fastener Notice in Service Precautions.

Connect the screws (1,4) that secure the contact plate to the steering wheel (3).

Tighten the screws to 5.5 Nm (49 inch lbs.).





3. Install the horn plunger to the steering column.
4. Install the inflator module.
5. Enable the SIR system. Refer to Restraint System Disabling and Enabling Zone 3.