Fuel Injector Replacement

FUEL INJECTOR REPLACEMENT

REMOVAL PROCEDURE




1. Remove the fuel rail assembly.
2. Remove the retaining clip (1) for the fuel injector (3).
3. Remove the fuel injector assembly (5) from the fuel rail.
4. Remove and discard the old O-rings (2) and (5). DO NOT reuse, use NEW ONLY.

INSTALLATION PROCEDURE




1. Install the NEW O-rings (2) and (4) on the fuel injector (3).
2. Apply a small amount of clean motor oil on the O-rings (2) and (4).
3. Position the fuel injector (3) in the fuel rail.
4. Install the retaining clip (1) for the fuel injector (3).
5. Install the fuel rail assembly.